We solve difficult problems with integrated support from carbide materials to finished product manufacturing!
FAQ
How do you store cemented carbide products?
For cemented carbide materials:
Storing at room temperature is fine. (Less than 300 in Celsius, as cobalt oxidizes at that temperature)
Humidity will leads to rusting, so we recommend storing the materials in an area with low humidity.
For complete metal molds:
Cemented Carbide corrosion can occur from grinding fluid, lubricating liquid, or other liquids.
If the grinding or lapping surface is not stored properly, corrosion may occur.
Store using a rust preventive oil or paper.
Q&A in the same category in this question
-
What is the difference between cemented carbide and ceramics?
The hardness of ceramics approaches that of diamond, the hardest mineral on earth. If the hardness of diamond is 10, ceramics exhibit a hardness of 9 or higher, which is harder than tungsten and other hard metals. The difference in composition also results in a heavier weight in the case of cemented carbides. However, cemented carbides can be made with various characteristics depending on tungsten carbide (WC) particle size, the amount of bonding material, and additives, so it is possible to select the most suitable grade for the application from a wide range of available grades.
-
What is the main component of cemented carbide?
The main component is tungsten carbide (WC), which becomes cemented carbide after bonding with metallic binders such as cobalt and nickel.
Additives such as chromium (Cr) are added to these alloys to create cemented carbides with various characteristics. -
Are there any changes due to thermal conductivity?
Thermal conductivity is based on the amount of Co. Lower Co levels lead to higher conductivity.
Generally, higher conductivity means that heat escapes well and frictional heat can be controlled.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details