We solve difficult problems with integrated support from carbide materials to finished product manufacturing!
FAQ
What is the difference between cemented carbide and ceramics?
The hardness of ceramics approaches that of diamond, the hardest mineral on earth. If the hardness of diamond is 10, ceramics exhibit a hardness of 9 or higher, which is harder than tungsten and other hard metals. The difference in composition also results in a heavier weight in the case of cemented carbides. However, cemented carbides can be made with various characteristics depending on tungsten carbide (WC) particle size, the amount of bonding material, and additives, so it is possible to select the most suitable grade for the application from a wide range of available grades.
Q&A in the same category in this question
-
How do you store cemented carbide products?
For cemented carbide materials:
Storing at room temperature is fine. (Less than 300 in Celsius, as cobalt oxidizes at that temperature)
Humidity will leads to rusting, so we recommend storing the materials in an area with low humidity.
For complete metal molds:
Cemented Carbide corrosion can occur from grinding fluid, lubricating liquid, or other liquids.
If the grinding or lapping surface is not stored properly, corrosion may occur.
Store using a rust preventive oil or paper. -
Why does the amount of Co and WC particle size affect the thickness of the heat affected layer?
It is thought that when Co is in large quantities the fusing point is lowered, which increases the amount that melts and thickening the damaged layer.
It is also thought that when WC particle size is small, the material becomes easier to melt due to the volume effect, which thickens the damaged layer. -
What is the relationship between hardness and strength?
Hardness affects resistance to abrasion, and harder the material the more resistant it is to abrasion.
However, amount of abrasion is not only determined by hardness, but could be affected by adhesions caused by workpieces of certain materials.
Thickness also affects the life of material, and so the environment and manufacturing process must be taken into consideration when selecting cemented carbide grade.
There are many factors related to strength, such as transverse rupture strength, impact strength, fracture toughness value and others, therefore material selection must be made in consideration of these factors.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details