We solve difficult problems with integrated support from carbide materials to finished product manufacturing!
FAQ
What kind of cemented carbide is used as cutting tools?
The material of cemented carbide to be selected depends on the workpiece and its thickness, etc. In general, for use as a cutting tool, ultrafine grain cemented carbide, which consists of ultrafine tungsten carbide (WC) particles, is often selected to increase cutting ability and to prevent chipping.
Q&A in the same category in this question
-
What is the difference between cemented carbide and HSS?
Cemented carbide is an alloy with high hardness, heat resistance and strength. HSS, on the other hand, generally has relatively lower strength and heat resistance, but has higher impact resistance.
As their raw materials and manufacturing methods differ, there is a significant difference in costs between the two materials.
Selecting the suitable material is recommended though considering the application and the timing of replacement after installation.
-
Why is there a 50% change in volume?
Carbide is a material made by compacting powder during sintering, and there are some gaps inside the carbide where air and particles collide.
Through sintering, the cobalt liquefies, and a 50% reduction in volume occurs when tungsten particles are attracted due to the capillary phenomenon. The contacting surfaces of different powdered particles try to mix and homogenize, inducing the atoms to move in an attempt to create new compounds. -
What is the relationship between hardness and strength?
Hardness affects resistance to abrasion, and harder the material the more resistant it is to abrasion.
However, amount of abrasion is not only determined by hardness, but could be affected by adhesions caused by workpieces of certain materials.
Thickness also affects the life of material, and so the environment and manufacturing process must be taken into consideration when selecting cemented carbide grade.
There are many factors related to strength, such as transverse rupture strength, impact strength, fracture toughness value and others, therefore material selection must be made in consideration of these factors.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details