We solve difficult problems with integrated support from carbide materials to finished product manufacturing!
FAQ
What is the difference between cemented carbide and cermet?
Both cemented carbide and cermet are composite materials made by mixing and sintering carbide or nitride powders with a metallic binder.
However, whereas cemented carbides are made of tungsten carbide (WC), the main component, bonded mainly with cobalt (Co) and nickel (Ni),
Cermet is made by bonding titanium compounds such as titanium carbide (TiC) and titanium carbide nitride (TiCN) with nickel (Ni) and cobalt (Co).
In other words, the difference between cemented carbide and cermet is the main component.
Q&A in the same category in this question
-
Why is there a 50% change in volume?
Carbide is a material made by compacting powder during sintering, and there are some gaps inside the carbide where air and particles collide.
Through sintering, the cobalt liquefies, and a 50% reduction in volume occurs when tungsten particles are attracted due to the capillary phenomenon. The contacting surfaces of different powdered particles try to mix and homogenize, inducing the atoms to move in an attempt to create new compounds. -
What is the main component of cemented carbide?
The main component is tungsten carbide (WC), which becomes cemented carbide after bonding with metallic binders such as cobalt and nickel.
Additives such as chromium (Cr) are added to these alloys to create cemented carbides with various characteristics. -
What is the difference between cemented carbide and ceramics?
The hardness of ceramics approaches that of diamond, the hardest mineral on earth. If the hardness of diamond is 10, ceramics exhibit a hardness of 9 or higher, which is harder than tungsten and other hard metals. The difference in composition also results in a heavier weight in the case of cemented carbides. However, cemented carbides can be made with various characteristics depending on tungsten carbide (WC) particle size, the amount of bonding material, and additives, so it is possible to select the most suitable grade for the application from a wide range of available grades.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details