We solve difficult problems with integrated support from carbide materials to finished product manufacturing!
FAQ
Are there any changes due to thermal conductivity?
Thermal conductivity is based on the amount of Co. Lower Co levels lead to higher conductivity.
Generally, higher conductivity means that heat escapes well and frictional heat can be controlled.
Q&A in the same category in this question
-
Why is there a 50% change in volume?
Carbide is a material made by compacting powder during sintering, and there are some gaps inside the carbide where air and particles collide.
Through sintering, the cobalt liquefies, and a 50% reduction in volume occurs when tungsten particles are attracted due to the capillary phenomenon. The contacting surfaces of different powdered particles try to mix and homogenize, inducing the atoms to move in an attempt to create new compounds. -
How do you store cemented carbide products?
For cemented carbide materials:
Storing at room temperature is fine. (Less than 300 in Celsius, as cobalt oxidizes at that temperature)
Humidity will leads to rusting, so we recommend storing the materials in an area with low humidity.
For complete metal molds:
Cemented Carbide corrosion can occur from grinding fluid, lubricating liquid, or other liquids.
If the grinding or lapping surface is not stored properly, corrosion may occur.
Store using a rust preventive oil or paper. -
What causes cemented carbide to crack?
Compared to metal materials, cemented carbide materials have a different thermal expansion coefficient. For this reason, cracks may occur in shrink/cooling-fitted products when the operating temperature is significantly higher (lower) than the designed value. When using cemented carbides with high hardness, problems such as cracking may occur by high impact, so the required fracture toughness value should also be carefully considered.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details