We solve difficult problems with integrated support from carbide materials to finished product manufacturing!
FAQ
What is the main component of cemented carbide?
The main component is tungsten carbide (WC), which becomes cemented carbide after bonding with metallic binders such as cobalt and nickel.
Additives such as chromium (Cr) are added to these alloys to create cemented carbides with various characteristics.
Q&A in the same category in this question
-
What are the weaknesses of cemented carbides?
Compared to general iron alloys, cemented carbide has lower toughness, which may cause chipping or peeling of the cutting edge.
In addition, as the relative density is about twice that of iron, the heavier weight of cemented carbide may be a disadvantage. -
What is the difference between cemented carbide and HSS?
Cemented carbide is an alloy with high hardness, heat resistance and strength. HSS, on the other hand, generally has relatively lower strength and heat resistance, but has higher impact resistance.
As their raw materials and manufacturing methods differ, there is a significant difference in costs between the two materials.
Selecting the suitable material is recommended though considering the application and the timing of replacement after installation.
-
What is the difference between cemented carbide and ceramics?
The hardness of ceramics approaches that of diamond, the hardest mineral on earth. If the hardness of diamond is 10, ceramics exhibit a hardness of 9 or higher, which is harder than tungsten and other hard metals. The difference in composition also results in a heavier weight in the case of cemented carbides. However, cemented carbides can be made with various characteristics depending on tungsten carbide (WC) particle size, the amount of bonding material, and additives, so it is possible to select the most suitable grade for the application from a wide range of available grades.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details